Skip to content

Spider Plant Care: Brown Tips, Babies and Easy Propagation

Quick Answer

Evidence & Caution

Give a spider plant (Chlorophytum comosum) bright, indirect light, a free-draining mix and water only when the top of the mix has started to dry. Most brown tips trace back to uneven watering, dry air, fertiliser or tap water, so adjust one thing at a time. The “babies” on long stems root easily and make free new plants.

It is a forgiving plant, which is why it suits beginners. Our guide to indoor plants in Australian homes covers where it fits among other easy choices.

What light does a spider plant want?

Aim for bright light without hard sun. The Royal Horticultural Society recommends bright but indirect light, and says strong sun can scorch leaves to yellow or brown. The same guide notes that low light is tolerated but growth slows and variegation may fade.

In practice, a spot a metre or two from a bright window, or behind a sheer curtain, works in most Australian homes. Western windows in summer can be harsh in any climate zone, from the tropics to Tasmania’s warmer inland valleys. If the pale stripes are fading, try a brighter position before changing anything else.

How often should you water it?

There is no fixed schedule. Water when the top of the mix has dried a little, then let excess drain away. The University of Saskatchewan says to water regularly but let the soil dry a little between drinks, and to avoid standing water, which can cause root rot. The RHS also advises emptying the saucer.

Thick, fleshy roots store some water, so a plant that has been missed for a few days usually copes better than one kept soggy. How quickly the mix dries depends on pot size, light, room temperature and humidity. Humid subtropical summers dry a pot more slowly than air-conditioned rooms do.

  • Check by touch: push a finger into the mix and lift the pot to feel its weight.
  • Slow down in cooler months: growth eases in temperate and cool regions over winter, so the mix stays damp longer.
  • Use a pot with drainage holes.

For a wider method that works across plants, see how often to water indoor plants.

Why are the leaf tips going brown?

Brown tips are a symptom with several possible causes, and sources do not agree on a single main one. Work through them in order.

Possible causeWhat the sources sayWhat to try
Uneven wateringThe RHS lists both too much and too little waterSettle into the touch-check routine above
Dry soil or dry airListed by Saskatchewan, Clemson and the RHSKeep the plant away from heaters and air-conditioner outlets
Fertiliser or saltsClemson Extension names excess fertiliser or water high in soluble salts as a cause of leaf tip burnFeed lightly, follow the label, and flush the pot with plain water now and then
Tap waterSaskatchewan and the RHS report sensitivity to fluoride, and Saskatchewan also names chlorineTry rainwater for a few weeks and compare new growth
Strong sunThe RHS lists bright sunlightMove the plant back from the glass

Two cautions. First, advice differs on whether standing tap water helps: Saskatchewan says chlorine fades if water sits for a day but fluoride does not. Second, whether your local tap water is a problem is unproven for any one home. Treat rainwater as a simple test, not a guaranteed cure.

Brown tips do not turn green again. You can snip off the damaged tips with clean scissors while you correct the cause, and the RHS says this is fine. Judge success by the new leaves.

How do you propagate the plantlets?

Plantlets can be started whenever they have formed. Clemson notes that new plantlets can be started at any time, and that most offshoots form as days shorten in autumn, so expect more of them in the cooler months.

  1. Choose a plantlet with small root nubs at its base, if it has them.
  2. Water method: cut it from the stem and stand it in a glass of water, base submerged and leaves dry. Pot it once the roots have lengthened. Both Saskatchewan and the RHS describe this approach.
  3. Soil method: keep the plantlet attached to the parent, set its base into a small pot of damp mix beside the plant and hold it with a bent paper clip or wire. Cut the stem once it has rooted. This is also described by Saskatchewan and the RHS.
  4. Keep the mix lightly moist and the pot in bright, indirect light.

Rooting speed varies with warmth and light. Do not pull at a new plantlet to test whether it has roots. New leaf growth is the better sign.

When should you repot a crowded plant?

Repot when roots fill the pot. Clemson advises dividing and repotting before the roots expand enough to crack the container, and says repotting can be done at any time of year. The RHS suggests moving a plant to a slightly larger pot every year or two after its first year.

Signs of a crowded pot include roots pushing out of drainage holes, water running straight through, and a plant that dries out within a day or two. Choose a pot only a little bigger, use a general-purpose indoor potting mix, and keep drainage holes clear. If you would rather not go up a size, divide the clump into two or three sections and pot each one.

Hold off on fertiliser after repotting. Clemson suggests waiting four to six months before feeding a newly potted plant. The RHS notes that regular repotting into fresh mix can make extra feeding unnecessary. When you do feed, use a general houseplant fertiliser at the label rate.

Can you grow spider plant outdoors in Australia?

In frost-free gardens it is often grown in shaded beds and pots, and it is a common sight in Australian gardens. It is not a plant to plant and forget, though: it spreads by plantlets, and the Weeds of Australia profile notes it can establish from discarded garden refuse.

The practical lesson is simple: do not dump clippings, plantlets or unwanted plants in bushland or on roadsides. Bag them for your green waste collection or compost them well away from natural areas. Rules differ between places, so check your council’s weed list and local advice before planting it in the ground, particularly near bushland.

Common spider plant mistakes

  • Leaving the pot standing in a full saucer.
  • Putting it in direct afternoon sun against glass.
  • Feeding often to fix brown tips, which can make salts a bigger issue.
  • Expecting damaged tips to recover.
  • Repotting into a much larger pot, which holds water for longer.
  • Cutting off every long stem; the plantlets are the easiest way to renew an old plant.

If you enjoy low-fuss foliage, our rubber plant care guide covers another plant that dislikes wet feet and sudden changes in light.

Sources

No comment yet, add your voice below!


Add a Comment

Your email address will not be published. Required fields are marked *