Skip to content

Calathea Care: Curling Leaves, Crispy Edges and Humidity

Quick Answer

Evidence & Caution

Curling leaves and crispy brown edges on a calathea most often point to dry air, uneven watering, or both. Start by checking the soil and the air around the plant, then look at where it sits relative to air-conditioning, heaters and drafts.

Browned edges do not turn green again. The aim is healthy new growth, not rescuing the damaged leaf.

What is a calathea, and why does the name vary?

Calatheas belong to the Marantaceae family, often called the prayer plant family. That is why many fold their leaves up at night and open them again the next day, according to Bunnings’ calathea guide.

You will also see them sold as Goeppertia. The RHS calathea guide explains that the common name now covers three genera: Ctenanthe, Goeppertia and Stromanthe. Nurseries still label most of them “calathea”, so that is the word to look for. The care needs below apply across the group, though individual plants vary in how fussy they are.

For the wider picture of choosing and placing houseplants in Australian homes, see this broader look at indoor plants across Australian climates.

Why are my calathea leaves curling?

Several causes produce a similar look, so match the curl to your conditions.

Likely causeWhat you noticeWhat to try
Soil dried out completelyLeaves roll inward; mix pulls from the pot edgeWater thoroughly, then keep moisture more even
Dry airCurl plus crisp edges or tipsRaise humidity; move away from vents
Draught or cold airSudden curl after a cold night or vent blastMove to a stable, warm spot
Overwatering or poor drainageCurl with yellowing, soft stems, soggy mixLet the surface dry slightly; empty saucers; check drainage
Spider mitesDull, speckled or bronzed leaves, fine webbingInspect undersides; wash (see below)

Bunnings notes that letting the potting mix dry out completely causes leaves to roll up, and that repeated drying stresses the plant. Waterlogged roots are the opposite problem. The RHS advises emptying excess water from decorative pots, because waterlogged roots can rot.

How much light does a calathea need?

Bright, indirect light suits most. Both Bunnings and the RHS describe a bright spot out of direct sun. Weak growth in low light is a particular risk for Goeppertia types, according to the RHS.

In much of Australia, strong summer sun through glass can scorch these leaves, so a position back from a west- or north-facing window (north is the sunny side in the southern hemisphere) is usually safer than the sill itself. An east-facing window or a bright spot a metre or two from a brighter window often works. This is a starting point rather than a rule. Watch the plant for a few weeks and adjust.

How should you water for even moisture?

Aim for evenly moist, never soaked and never bone dry. The RHS suggests keeping compost evenly moist through the growing season and letting the surface dry a little between waterings in cooler months, without letting it dry out completely.

A practical routine:

  1. Push a finger into the top few centimetres of the mix. Bunnings suggests checking the top 2.5 to 5 cm.
  2. If it feels dry at that depth, water until it drains freely from the base.
  3. Empty the saucer after the water has drained.
  4. Check more often in hot weather or in a room with air-conditioning running, and less often in cool, humid conditions.

Pot size, mix and room temperature all change how fast the mix dries, so no fixed schedule is reliable. Compare this with a plant that tolerates missed waterings, such as the one in the ZZ plant routine for forgetful waterers. Calathea will not forgive the same neglect.

Does tap water cause crispy edges?

Possibly, but the evidence is thinner than many care sites suggest. The RHS prefers rainwater, but says calatheas tolerate tap water that has stood for at least 24 hours, which allows chlorine to evaporate. It also mentions distilled water as an option.

What is not well established in the sources checked is which dissolved substances actually cause tip burn, or how often water quality is the main culprit compared with dry air. Both the RHS and Bunnings put dry air first as the usual reason for brown edges.

A sensible test, if humidity and watering already look right and tips keep browning, is to switch to rainwater for a few weeks and compare new leaves. Water quality differs between towns and between bore, tank and mains supplies, so what helps one household may make no difference in another.

How do air-con and heaters affect calathea in Australian homes?

Both dry the air and create moving air near the plant. Bunnings advises keeping calathea warm and away from cold air and draughts, and the RHS links brown tips and edges to dry air.

  • Air-conditioning (common in tropical and subtropical homes, and in summer across the south): keep the plant out of the direct airflow and away from the unit. Even a plant a metre from the vent can dry out faster than one in a still corner.
  • Heaters (cooler winters in the temperate south, Tasmania and highlands): avoid shelves directly above or beside a heater. Warm dry air can be harsher than cool still air.
  • Humid coastal rooms: a bathroom or laundry with good natural light can suit calathea, as the RHS notes that bathrooms are a good spot. A dark windowless bathroom does not.
  • Arid and inland homes: expect the driest air and check moisture most often.

To raise humidity locally, Bunnings suggests grouping plants together or standing the pot on a saucer of pebbles and water, keeping the pot base above the waterline. Misting is mentioned by the RHS, though sources disagree on how much it helps, and wet leaves in still air can invite problems. Treat any of these as a modest boost, not a fix for a vent blowing straight onto the plant. Our guide to humidity for houseplants covers room-by-room options without relying on a fixed percentage.

How do you spot and wash off spider mites?

Dry, warm indoor air favours spider mites, so crispy calatheas are also good candidates. Washington State University describes yellowish, bronze or silvery stippling on the top of the leaf, with mites and webbing on the underside. They are tiny, so a magnifying glass helps. The RHS describes fine pale mottling above and cast skins below, and notes that damage develops quickly in warm dry conditions, including heated rooms.

Dry-air browning has a crisp, uniform edge or tip. Mites cause speckling across the leaf surface, often with webbing between leaf and stem. If you are unsure, hold a leaf up and check the underside.

For light to moderate infestations, WSU suggests rinsing the plant thoroughly in the shower or sink with lukewarm water, paying attention to the undersides, and repeating at least weekly. Wrap the pot base in a bag so soil does not clog the drain. You can also wipe leaves gently with a damp cloth, supporting each leaf from below.

Isolate the plant from others while you treat it, since mites spread by contact and on webbing. WSU advises discarding heavily infested plants. Raising humidity can lower the risk but, as the RHS notes, will not control mites on its own. If washing fails, check any product label and your state agriculture department before using one.

What mistakes make calathea worse?

  • Watering on a fixed schedule instead of checking the mix.
  • Leaving the pot standing in a full saucer.
  • Placing it in the airflow of a split system or beside a heater.
  • Putting it in direct sun through a west or north window.
  • Cutting off every brown leaf at once. Trim only the damaged part of the edge, or remove the leaf if it is mostly dead.
  • Assuming a single fix. Dry air, uneven watering and mites often overlap.

Change one thing at a time and give new leaves a few weeks to show the result. If edges keep browning only on the newest leaves after humidity, watering and position are settled, that is the point to test the water source.

Sources

No comment yet, add your voice below!


Add a Comment

Your email address will not be published. Required fields are marked *