Give an anthurium bright, indirect light, a chunky mix that drains fast and water only when the top of the mix has dried. Most failures to flower come down to light that is too dim, and most leaf problems trace back to soggy roots or dry air.
The “flower” you buy is actually a spathe, a modified leaf. It can last for weeks, and a healthy plant can keep producing new ones through the warmer months.
What light does an anthurium need to flower?
The Royal Horticultural Society describes bright but indirect light as best, with direct summer sun scorching the leaves and too little light stopping flowering. NC State Extension says the same: low light slows growth and reduces blooms.
In an Australian home, that usually means:
- Good spots: a metre or so back from a bright window, or right at a window that is shaded by an eave, verandah or sheer curtain.
- Poor spots: hot western glass in summer, or a corner where you need the lights on to read.
- Signs of too little light: dark, soft leaves and no new spathes for months.
- Signs of too much: pale, bleached or crisp patches on the leaf surface.
Light changes with the seasons and with where you live. A spot that is perfect in a Brisbane winter may be too harsh in January, while a Hobart or highlands windowsill may need the brightest position in the house through winter. Move the pot a little rather than hoping the plant adapts.
What potting mix suits an anthurium?
In the wild, many anthuriums grow on trees or in leaf litter, with roots that are exposed to air. That habit explains why they hate dense, wet soil. The RHS recommends an open, fast-draining mix, and its growing guide suggests combining a base mix with perlite and orchid bark. The Laidback Gardener likewise prefers an orchid-style mix, or an orchid and houseplant blend, over ordinary potting soil.
A simple approach: start with a quality indoor potting mix and open it up with orchid bark and perlite until a handful holds its shape loosely, then falls apart. Use a pot with drainage holes. Avoid a cachepot that lets water sit around the base.
How often should you water?
There is no fixed schedule. Check the mix first.
- Push a finger a few centimetres into the mix. The RHS suggests watering when it is nearly dry.
- If it is still damp, wait a few days and check again.
- When you water, soak the mix thoroughly until water runs from the base.
- Empty the saucer after the water has drained.
Frequency depends on pot size, mix, temperature and airflow. A plant in a warm Darwin room in the wet season will dry faster than one in a cool Canberra lounge in July. The RHS also notes that soggy compost for long periods causes root rot, and it prefers rainwater or filtered water at room temperature in hard-water areas. If your tap water leaves white crusts on the pot rim, rainwater is a reasonable switch, but that is a judgement call rather than a proven need for every household.
Does humidity matter?
Yes, but you do not need a greenhouse. Anthuriums come from humid tropical conditions, and both the RHS and NC State link brown leaf edges to dry air.
Practical ways to help:
- Group the plant with other leafy plants.
- Stand the pot on a tray of damp pebbles, keeping the pot base above the water.
- Keep it away from air-conditioner outlets, heaters and open doors.
- Choose a brighter bathroom or kitchen if there is natural light there.
In dry inland and southern winters, with heaters running, humidity drops sharply. Subtropical coastal homes usually have an easier time, though air-conditioning can undo that. If you are growing other moisture-loving plants nearby, our look at fern choices for humid corners covers similar placement ideas.
Why are the leaf tips brown or the leaves yellow?
Work out the cause from the pattern.
| Symptom | Likely cause | What to try |
|---|---|---|
| Brown, crisp tips or edges | Dry air, or sun scorch | Raise humidity, move out of direct sun |
| Pale or bleached patches facing the window | Too much direct sun | Pull back or filter the light |
| Yellowing lower leaves with damp mix | Overwatering, poor drainage | Check roots, let the mix dry, improve drainage |
| Yellowing with dry mix and wilting | Underwatering | Water thoroughly, then reassess the schedule |
| Old lower leaf yellowing slowly, plant otherwise fine | Normal ageing | Remove the leaf at the base |
The RHS does not address yellowing directly, but it does list root rot from soggy compost as the main problem. When in doubt, slide the plant from its pot. Healthy roots are firm and pale. Black, mushy roots with a sour smell point to rot, and the damaged parts should be trimmed before repotting into fresh, open mix.
How do you keep the flowers coming?
Light is the first lever. NC State notes that a high-phosphorus fertiliser and removing spent blooms encourage flowering, and the RHS recommends regular feeding in the growing season. In Australia that runs roughly from spring to early autumn, so about September to March in most regions. Use a slow-release or diluted liquid fertiliser at label rates and ease off in the cooler months. Overfeeding can burn roots, particularly in a small pot.
To remove a spent spathe:
- Follow the flower stem down to where it meets the plant.
- Cut cleanly at the base with clean secateurs.
- Leave the new buds and leaves alone.
The RHS says anthuriums need no other pruning. Wear gloves, as the sap can irritate skin.
What about aerial roots?
The thick brown roots that appear above the mix are normal. NC State notes that aerial roots may appear and stems shorten as the plant ages, and the Laidback Gardener describes them as part of the plant’s growth habit, much like those on a moth orchid.
Do not cut them off. Tuck them gently into the mix, or cover them with a little damp bark if the plant is leggy.
When and how do you repot or divide?
The RHS says plants can stay in the same pot for a year or two, then need repotting every two to three years. Repot when roots circle the pot or push out of the drainage holes. Move up by only one pot size: the RHS warns that overpotting keeps the mix wet and risks root rot.
The Laidback Gardener recommends repotting from early spring to midsummer, and in Australia that translates to roughly September to January in most regions, once nights have warmed. In cooler highlands and Tasmania, wait for settled weather.
- Water the plant a day beforehand.
- Slide it out and loosen old mix from the roots.
- Trim any dead or mushy roots.
- If it has a bare, leggy stem, set it deeper so the lower stem and aerial roots sit in the mix. This is a practical technique from one experienced gardener rather than a tested method.
- If several stems are clustered, gently pull them into sections that each have their own roots. The RHS and the Laidback Gardener both describe this as a way to propagate.
- Pot into fresh open mix and water in.
Expect a short pause in growth. Keep the plant out of strong sun until it settles.
Common mistakes
- Planting in dense potting soil without added bark or perlite.
- Watering on a fixed day regardless of the mix.
- Standing the pot in a full saucer.
- Placing it in a dim corner and expecting flowers.
- Moving it into sun that is too intense during a hot spell.
- Repotting into a much larger pot.
Anthuriums reward a steady routine more than frequent fiddling. If you are building a wider collection, our Australian guide to choosing and keeping houseplants helps place each plant in the right room, and the flowering peace lily is a good companion plant for a similar position.





No comment yet, add your voice below!